velocityg4
Apr 20, 12:21 PM
this one is listed as being specifically for the samsung HS12UHE
http://cgi.ebay.com/1-8-usb-external-HDD-Enclosure-CASE-f-SATA-LIF-HS12UHE-/250691918585?pt=PCC_Drives_Storage_Internal&hash=item3a5e671af9
after many fruitless ebay searches i located this by searching "SATA LIF"
That must be the correct one. If you count the number of pins on the back of LIF connector you will see there are 24. Since I already managed to get the Air running I have already backed up the data. So do not need one of these anymore. I'll keep this referenced though if I ever happen to need to perform data recovery on another Rev B/C Air. I'll also mention if the one I ordered is for the 40 or 24 pin connector. Though from further research I think it is 40 pin.
http://cgi.ebay.com/1-8-usb-external-HDD-Enclosure-CASE-f-SATA-LIF-HS12UHE-/250691918585?pt=PCC_Drives_Storage_Internal&hash=item3a5e671af9
after many fruitless ebay searches i located this by searching "SATA LIF"
That must be the correct one. If you count the number of pins on the back of LIF connector you will see there are 24. Since I already managed to get the Air running I have already backed up the data. So do not need one of these anymore. I'll keep this referenced though if I ever happen to need to perform data recovery on another Rev B/C Air. I'll also mention if the one I ordered is for the 40 or 24 pin connector. Though from further research I think it is 40 pin.
DjPabz
May 5, 07:53 AM
Does anyone have this problem? IPhoto duplicates the event section. When sync to the iPhone. Shows in iTunes but not in iPhoto .
yeah I have this, I think it's a problem with the new iPhoto update, pretty annoying! https://discussions.apple.com/thread/3023160?start=0&tstart=0
yeah I have this, I think it's a problem with the new iPhoto update, pretty annoying! https://discussions.apple.com/thread/3023160?start=0&tstart=0
Eluon
Dec 15, 11:56 PM
has a deal been reached about the powerbook g3
cpucrash0
May 1, 06:40 PM
I hope it's announced in june I really want a new iPhone and I don't want a white iphone 4 because I already have a black iPhone 4 so what's the point in getting the same one. I want an iPhone 5.
more...
SB123
Apr 18, 03:29 PM
I am new to photography and recently returned from a trip to Costa Rica where I practiced a lot of my newly learned knowledge. I went through my photos and here is one that I thought was one of the better shots.
I was curious to see what others think? Is this a good photo or just an amateur shot? I used a Nikon D60. I can take the criticism so lets hear it. :D
Thanks.
I was curious to see what others think? Is this a good photo or just an amateur shot? I used a Nikon D60. I can take the criticism so lets hear it. :D
Thanks.
Cabbit
Apr 18, 03:37 PM
Its a nice shot but i don't really get a sense of scale, i don't get the feeling for how big the mountain is.
more...
rockyroad55
May 6, 12:03 PM
lol thats the first thing I thought when I saw the thread and his name I was like 'hmm, whats he gonna do when he gets an imac, make another account?" lol
Well we'll know who it will be when another user with that name shows up. :p
Well we'll know who it will be when another user with that name shows up. :p
jared_kipe
Feb 11, 10:39 AM
My favorite is SilverStripe. Not as widely used or known, but I love the flexibility it gives me as a developer and it is pretty user-friendly, too.
Side note -- Ruby on Rails is framework, not really a CMS. It would be comparable to Cake, Symfony or Yii (frameworks for PHP).
+ 1 for SilverStripe, it is the CMS for software developers. The thing about SilverStripe is that although it has a GUI CMS for setting up pages, I like it more for its robust ORM and PHP framework features.
I wrote jaredandkaylie.com (http://jaredandkaylie.com/) in SilverStripe
Side note -- Ruby on Rails is framework, not really a CMS. It would be comparable to Cake, Symfony or Yii (frameworks for PHP).
+ 1 for SilverStripe, it is the CMS for software developers. The thing about SilverStripe is that although it has a GUI CMS for setting up pages, I like it more for its robust ORM and PHP framework features.
I wrote jaredandkaylie.com (http://jaredandkaylie.com/) in SilverStripe
more...
FSGDAG
Feb 25, 09:34 AM
Hi All...
I was hoping for some help and guidance. I've been a network engineer for 15 years now. All of my experience is in the Microsoft arena. Lately, my organization has been adopting MAC / Apple products ( iPad, iPhones, etc. ) but we've now gone as far as to purchase our first MAC desktop system, an iMAC.
Having no formal training in administering an iMAC in a Windows AD Domain ( 2008 ) I've been scouring the internet ( Google ) looking for as much information as I can. So far, I've been able to integrate it into our AD Domain and have network users login and have access to their network home directories.
I am, however, suffering in a couple of areas and was hoping that I could get some real world advice on the following:
1) What is the best way for me to administer this computer remotely using my Windows 7 Pro workstation? Example: Remotely connecting to it for help desk and other needs. Currently I use Dameware NT Utilities to remotely connect and administer my PC based workstations. Is there a similar utility for iMAC's that will run on Windows 7?
2) Login scripts... How am I able to accomplish this on a MAC? My PC based workstations use a batch file to map network drives and other things needed at login.
3) What is the best way for me to be able to control the iMAC through Group Policies? Or maybe I should be asking if this is even possible?
I appreciate in advance for any help your able to give! :)
I was hoping for some help and guidance. I've been a network engineer for 15 years now. All of my experience is in the Microsoft arena. Lately, my organization has been adopting MAC / Apple products ( iPad, iPhones, etc. ) but we've now gone as far as to purchase our first MAC desktop system, an iMAC.
Having no formal training in administering an iMAC in a Windows AD Domain ( 2008 ) I've been scouring the internet ( Google ) looking for as much information as I can. So far, I've been able to integrate it into our AD Domain and have network users login and have access to their network home directories.
I am, however, suffering in a couple of areas and was hoping that I could get some real world advice on the following:
1) What is the best way for me to administer this computer remotely using my Windows 7 Pro workstation? Example: Remotely connecting to it for help desk and other needs. Currently I use Dameware NT Utilities to remotely connect and administer my PC based workstations. Is there a similar utility for iMAC's that will run on Windows 7?
2) Login scripts... How am I able to accomplish this on a MAC? My PC based workstations use a batch file to map network drives and other things needed at login.
3) What is the best way for me to be able to control the iMAC through Group Policies? Or maybe I should be asking if this is even possible?
I appreciate in advance for any help your able to give! :)
NWI73
Apr 7, 07:25 AM
Apple
Nike (shoes)
Under Armour GUILTY pleasure :o
Suzuki
Panasonic
Express (shirts)
Fly racing (anything from them)
Nike (shoes)
Under Armour GUILTY pleasure :o
Suzuki
Panasonic
Express (shirts)
Fly racing (anything from them)
more...
Eidorian
Dec 9, 11:03 AM
101.5 degrees F is nothing...My last p4 idled at around 127 degrees :pYeah but my hard drive is below 50 F. :eek:
nfocus design
Nov 4, 03:54 PM
I have a 23" and haven't had any problems with it. I have seen some pink ones in the store, but mine has been fine. Even if you got one and it was pink, just calibrate it and you should be fine.
more...
JollyJoeJoe
Apr 26, 08:45 PM
After some research my top 3 sorted options are:
1.- OCZ Vertex 2 120GB
2.- Intel X25-M 120GB
3.- Samsung 470 Series 128GB
I will be using it as my boot drive for Mac OS X 10.6.7, any suggestion which one would be the best option for speed ?, thanks
These are ok value for money options, try not to go with the OCz though if this article is anything to go by:
http://blog.macsales.com/9438-not-all-ssd%E2%80%99s-are-created-equal-the-story-continues
OWC, Micron\Crucial and Intel are the best brands and use the most quality components. With OWC being better than the Micron\Crucial which uses a slower Marvell Controller.
1.- OCZ Vertex 2 120GB
2.- Intel X25-M 120GB
3.- Samsung 470 Series 128GB
I will be using it as my boot drive for Mac OS X 10.6.7, any suggestion which one would be the best option for speed ?, thanks
These are ok value for money options, try not to go with the OCz though if this article is anything to go by:
http://blog.macsales.com/9438-not-all-ssd%E2%80%99s-are-created-equal-the-story-continues
OWC, Micron\Crucial and Intel are the best brands and use the most quality components. With OWC being better than the Micron\Crucial which uses a slower Marvell Controller.
istonedu321
Dec 3, 07:29 AM
yeah i have come across a couple of those. always a let down when you realize it will never happen.
more...
swedishchef
Sep 28, 11:33 AM
Thanks for your advice and suggestions. I think I will go ahead with a bluetooth mouse and definitely save my money on RAM, and also stick with a simple stand rather than a fan powerd cooler. Thanks again.
Josh
Josh
OPTiK
Mar 13, 11:45 AM
Are you using this:
http://www.newsden.net/jailbreak-ios-4-3-with-pwnagetool-bundles-custom-firmware-7130/
I was using this guide: http://www.redmondpie.com/jailbreak-ipad-4.3-ios-final-gm-with-pwnagetool-how-to-guide/ ...but i just came across this guide that i may try out today: http://www.redmondpie.com/jailbreak-4.3-on-windows-iphone-4-3gs-ipad-ipod-touch-using-sn0wbreeze-how-to-guide/
http://www.newsden.net/jailbreak-ios-4-3-with-pwnagetool-bundles-custom-firmware-7130/
I was using this guide: http://www.redmondpie.com/jailbreak-ipad-4.3-ios-final-gm-with-pwnagetool-how-to-guide/ ...but i just came across this guide that i may try out today: http://www.redmondpie.com/jailbreak-4.3-on-windows-iphone-4-3gs-ipad-ipod-touch-using-sn0wbreeze-how-to-guide/
more...
Missjenna
Feb 12, 01:54 AM
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_2_1 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8C148 Safari/6533.18.5)
The iPhone 4 was a failure at launch. The antenna is broken. It drops Internet connections and calls if held a certain. The glass claiming to be strong is weak sauce and the only good things on the phone are the cameras and screen.*
Am I the only one who feels this way?
Yep, think so :)
I also live in a rural area, and with my measly 1-2 bars of 3g, I rarely drop a call and get 1.1-2.0 mbps download speeds. My phone has been perfect.
The iPhone 4 was a failure at launch. The antenna is broken. It drops Internet connections and calls if held a certain. The glass claiming to be strong is weak sauce and the only good things on the phone are the cameras and screen.*
Am I the only one who feels this way?
Yep, think so :)
I also live in a rural area, and with my measly 1-2 bars of 3g, I rarely drop a call and get 1.1-2.0 mbps download speeds. My phone has been perfect.
katchow
Sep 19, 02:35 PM
He took the Der-Der-Der joke and beat it too death. That was the only funny thing, and he killed it.
And for the most part it is a Chappelle's Show wannabe, except with Mexican people and not black people...
don't forget wit. which is sorely lacking from mencia.
And for the most part it is a Chappelle's Show wannabe, except with Mexican people and not black people...
don't forget wit. which is sorely lacking from mencia.
wanchu83
Apr 14, 02:37 PM
I have iphone 4 white and my front is little bit yellowish or lemonish compared to back plate.
Do they still make it this way or did they correct it and it matches the white rim of backplate(real white color)?
Do they still make it this way or did they correct it and it matches the white rim of backplate(real white color)?
njmac
Sep 28, 07:24 PM
I may be able to help you - but not until next Wednesday. I'm working in Chelsea Market that day - and one of the guys I work with is gay and I know he goes dancing plus he lives in the area. I'll ask him for you and I'll post back after work.
Good Luck!
Good Luck!
TwistedPain
May 2, 04:22 PM
What more information would you like?
Specifically I'd like to know more about the production date. Was it one of the first iPhone 2G's sold? Or one of the last? Obviously it was made in 2007 so at least it was within the first year. What is the earlier known "production week" for an iPhone 2G?
I'm not sure how many production weeks there were for the iphone 8gb. I can tell you that, this specific one was produced in July. Why are you inquiring about this info anyway?
Specifically I'd like to know more about the production date. Was it one of the first iPhone 2G's sold? Or one of the last? Obviously it was made in 2007 so at least it was within the first year. What is the earlier known "production week" for an iPhone 2G?
I'm not sure how many production weeks there were for the iphone 8gb. I can tell you that, this specific one was produced in July. Why are you inquiring about this info anyway?
rohn
Oct 26, 10:04 AM
I live in Lake Worth, I should be there before 6
ericstjohn
Apr 27, 10:00 PM
Hi. I'm wondering if mixing and matching even Apple production apps affects their compatibility? Moving "up" to a Mac has been a bubble-buster since I discovered the dark side of legacy software and machines in an "upgraded to Intel" world.:mad:
I have a "Late '05" 2.3 dual core PPC 10.5.8 Leopard that came loaded from eBay with all the bells and whistles, assembled, apparently, from a grab bag and I have no disks for the uninstalling and reinstalling tricks.
FCP is version 5.0.4, Compressor is 2.0.1, Logic Studio is 8.0.1, iDVD is 7.0.4 and DVD Studio is 3.0.2. (Do all these fit together? Looks like a production suite made from the parts box. LOL!)
I have Toast 10 Titanium too.
The reason I mention that is, I'm having not only exporting problems with Compressor, quality problems exporting in Quicktime Conversion to AVI, but also burning issues with DVDs that won't play in the living room deck.
Compressor 2 gives me the now-famous Cannot Submit Batch message. I've tried all sorts of fixes -yes, even the Compressor Repair that's made for Compressor 3 and above. Again the legacy thing. After googling for more tricks, I have discovered Compressor 2's "preference file" is missing from Home>Library>Preferences. Hmmm. Maybe a new Compressor is in order? Which version should I install since I have all this mixed bag of wares?
So, Toast won't play, iDVD won't play, Compressor won't compress and AVI from Quicktime Conversion looks like crap. (I understand Toast 9 has good reports but since they "improved" it, I have no use for it. Again, the legacy.)
iDVD let me assemble and burn a DVD but it doesn't play properly. I made an .iso in there and burned it with Disk Utility. The deck plays the menu but I won't know anything else until I find the flippin' remote! That's something to remember though: burning in Disk Utility. That and finding the remote.
I can't even use DVD Studio until I figure out how to import and burn iDVD projects because of the issues between FCP and Compressor. So we're back to square one. FCP>Compressor won't work and it messes me up with FCP>DVDSP. Too bad. I like the Apple production apps but I'm about ready to jam CS4...
I have a "Late '05" 2.3 dual core PPC 10.5.8 Leopard that came loaded from eBay with all the bells and whistles, assembled, apparently, from a grab bag and I have no disks for the uninstalling and reinstalling tricks.
FCP is version 5.0.4, Compressor is 2.0.1, Logic Studio is 8.0.1, iDVD is 7.0.4 and DVD Studio is 3.0.2. (Do all these fit together? Looks like a production suite made from the parts box. LOL!)
I have Toast 10 Titanium too.
The reason I mention that is, I'm having not only exporting problems with Compressor, quality problems exporting in Quicktime Conversion to AVI, but also burning issues with DVDs that won't play in the living room deck.
Compressor 2 gives me the now-famous Cannot Submit Batch message. I've tried all sorts of fixes -yes, even the Compressor Repair that's made for Compressor 3 and above. Again the legacy thing. After googling for more tricks, I have discovered Compressor 2's "preference file" is missing from Home>Library>Preferences. Hmmm. Maybe a new Compressor is in order? Which version should I install since I have all this mixed bag of wares?
So, Toast won't play, iDVD won't play, Compressor won't compress and AVI from Quicktime Conversion looks like crap. (I understand Toast 9 has good reports but since they "improved" it, I have no use for it. Again, the legacy.)
iDVD let me assemble and burn a DVD but it doesn't play properly. I made an .iso in there and burned it with Disk Utility. The deck plays the menu but I won't know anything else until I find the flippin' remote! That's something to remember though: burning in Disk Utility. That and finding the remote.
I can't even use DVD Studio until I figure out how to import and burn iDVD projects because of the issues between FCP and Compressor. So we're back to square one. FCP>Compressor won't work and it messes me up with FCP>DVDSP. Too bad. I like the Apple production apps but I'm about ready to jam CS4...
sk3pt1c
Dec 17, 05:58 AM
thank you :)
how could i produce the pdf files?
how could i produce the pdf files?
No comments:
Post a Comment